July 25, 2024

Configuring Static Routes

1 min read

Sedikit melanjutkan tutorial yang telah dibuat oleh bapak Molavi Arman (Cara Kerja Static Routing Pada Jaringan Networking)  terdahulu. Kali ini kita akan mengeksplorasi penerapan Static Routing dengan menggunakan software Packet Tracer  5.0.

Adapun komponen yang dipakai dalam praktek kali ini yaitu :

  • 3 Buah Router
  • 3 Buah Switch
  • 3 Buah PC

Baiklah mari kita lihat topologinya sebagai berikut :

Selanjutnya kita Konfigurasi Setiap Routernya :

1. Konfigurasi R1

[sourcecode]
Router>enable

Router#configure terminal

Router(config)#hostname R1

R1(config)#interface fastethernet 0/0

R1(config-if)#ip address 172.16.3.1 255.255.255.0

R1(config-if)#no shutdown

R1(config-if)#exit

R1(config)#interface serial 0/0/0

R1(config-if)#ip address 172.16.2.1 255.255.255.0

R1(config-if)#no shutdown

R1(config-if)#clock rate 64000

R1(config-if)#exit

R1(config)#ip route 172.16.1.0 255.255.255.0 172.16.2.2

R1(config)#ip route 192.168.1.0 255.255.255.0 172.16.2.2

R1(config)#ip route 192.168.2.0 255.255.255.0 172.16.2.2
[/sourcecode]

 2.Konfigurasi R2

[sourcecode]
Router>enable

Router#configure terminal

Router(config)#hostname R2

R2(config)#interface fastethernet 0/0

R2(config-if)#ip address 172.16.1.1 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#exit

R2(config)#interface serial 0/0/0

R2(config-if)#ip address 172.16.2.2 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#exit

R2(config)#interface serial 0/0/1

R2(config-if)#ip address 192.168.1.2 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#clock rate 64000

R2(config-if)#exit

R2(config)#ip route 172.16.3.0 255.255.255.0 172.16.2.1

R2(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.1
[/sourcecode]

3. Konfigurasi R3

[sourcecode]
Router>enable

Router#configure terminal

Router(config)#hostname R3

R3(config)#interface fastethernet 0/0

R3(config-if)#ip address 192.168.2.1 255.255.255.0

R3(config-if)#no shutdown

R3(config-if)#exit

R3(config)#interface serial 0/0/1

R3(config-if)#ip address 192.168.1.1 255.255.255.0

R3(config-if)#no shutdown

R3(config-if)#exit

R3(config)#ip route 172.16.1.0 255.255.255.0 192.168.1.2

R3(config)#ip route 172.16.2.0 255.255.255.0 192.168.1.2

R3(config)#ip route 172.16.3.0 255.255.255.0 192.168.1.2
[/sourcecode]

SELAMAT MENCOBA

0 thoughts on “Configuring Static Routes

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © All rights reserved. | Newsphere by AF themes.